the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2005 wrx remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
JWorm 
Platinum - Posts: 2,208
Platinum spacespace
Joined: December 11, 2002
Location: New Hampshire, United States
Posted: July 04, 2006 at 1:06 PM / IP Logged  
no, no, no.... 2 diodes needed. I emailed ya.
wiretapper 
Copper - Posts: 166
Copper spacespace
Joined: December 11, 2003
Location: United States
Posted: July 04, 2006 at 9:58 PM / IP Logged  
demonpossessedn wrote:

jworn. I received your last email , however the attachment didnt make it there

I am posting here just incase you see this and not the email

I Think i can connect this without the diagram . All i have to to is daisy chain the brake shutdown to the brake wire to the wire to the neutral wire from the ecu, a 1 didode soldered before the ecu connection. 

791xv's brake shutdown wire--------------brake wire from car-----------------diode with stripe side towards ecu------------ecu's neutral wire

as soon as i get the ok I'll go for it

thanks again

You don't have to do any of that. The DEI BLACK/ wht neutral safety wire goes directly to the neutral wire on the ECU. I've done 3 WRX's already with this, and it's foolproof. If the car is not in neutral, it won't even attempt to start. No need to hook up to the parking brake. Luckily, Subaru is one of the few cars to have this wire right there.

I'll dig for the wire color/location tonight and post here.

demonpossessedn 
Member - Posts: 20
Member spacespace
Joined: August 13, 2005
Posted: July 06, 2006 at 1:40 AM / IP Logged  

wire tapper,                                   

I just finished my remote start as per jworms way, and its great.with his way there are two safety measures

the car wont attempt to start with the car in gear, or if the parking brake is down. if i connected the neutral wire from the 791 to the neutral wire on the car. i would only have one safety measure.

thank you all for your help, especially Jworm. the car is working 100 percent GREAT  

Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, December 7, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer