Matrix RSIII Sensor False warning on R/C

Home / the12volt's Install Bay / Car Security and Convenience / Matrix RSIII Sensor False warning on R/C (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jonchos

Copper - Posts: 256

Joined: February 28, 2005

Location: United States

Posted: July 23, 2006 at 12:42 AM / IP Logged

I have a 96 monte carlo and I have installed a Clifford Matrix RSIII about a year ago now. I used to have problems with the remote by-passing sensor 1 when I would arm the car right after shutting the door. So I usually just wait a few seconds and then arm and no problem. Now, today I did the same thing I have been doing and after about 5 minutes or so of arming the alarm the warning chirps on my remote would go off and the hammer image on my remote would shouw up. I was about 15 to 20 feet away from the car when it happened the first time and there was no warn away chirps on the car itself. Any Ideas?

Back to Top

tragik

Copper - Posts: 169

Joined: September 28, 2005

Location: Alaska, United States

Posted: July 23, 2006 at 5:51 AM / IP Logged

Try a new sensor.

Also, where do you live? Colder climates are hazardous to those things, and will often need replacement annually.

Northstart.....or start it your damn self.

Back to Top

jonchos

Copper - Posts: 256

Joined: February 28, 2005

Location: United States

Posted: July 23, 2006 at 8:31 AM / IP Logged

I live in AZ so...hahaha no cold weather here, hahaha.

Back to Top

jonchos

Copper - Posts: 256

Joined: February 28, 2005

Location: United States

Posted: July 27, 2006 at 11:23 PM / IP Logged

is the led on the shock sensor suppossed to be on all of the time? or only when armed? or when triggered? Mine is intermitent, with the alarm disarmed I get random flashes from it.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Matrix RSIII Sensor False warning on R/C

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.