spacer spacer spacer spacer

What to do if you have lots of monitors?

Post ReplyPost New Topic
< Prev Topic Next Topic >
Member - Posts: 35
Member spacespace
Joined: October 11, 2004
Location: United States
Posted: August 08, 2006 at 1:35 AM / IP Logged  
Ok say I want two 15" flipdowns and four Headrest would I need to wire them? I know I should run all of them off of the power wires form my head unit should I? What would yall do?
Dan Tha Man
Silver - Posts: 520
Silver spacespace
Joined: January 31, 2005
Location: Texas, United States
Posted: August 08, 2006 at 1:43 AM / IP Logged  

wire all of the power through a fuse(shouldn't need more than 5 amps) to an ignition wire in the vehicle, and all the grounds to one spot, with the small gauge of the wires that you'll use you can probably crimp all of them into one ring terminal.

And I'd definitely get a video amplifier, most have 1 input and 6 or 7 outputs.

Life moves pretty fast; if you don't stop and look around once in a while; you could miss it.
Silver - Posts: 252
Silver spacespace
Joined: August 19, 2005
Location: United States
Posted: August 30, 2006 at 9:41 PM / IP Logged  
how do you wire all the monitors threw a fuse? like a fuse from your fuse box or a fuse in-between the acc wire and the wire from the monitors?
killer sonata 
Silver - Posts: 718
Silver spacespace
Joined: May 17, 2006
Posted: August 30, 2006 at 10:20 PM / IP Logged  
I wouldnt ground them all in one spot. make the ground wires as short as possible.
Silver - Posts: 252
Silver spacespace
Joined: August 19, 2005
Location: United States
Posted: August 30, 2006 at 10:42 PM / IP Logged  
but what kind of fuse do you hook them all up to?
Silver - Posts: 703
Silver spacespace
Joined: January 14, 2006
Location: United States
Posted: September 11, 2006 at 5:00 AM / IP Logged  

pretty much any type of fuse will be fine... ATC, mini, glass tube... it doesn't matter so much as long as the rating is matched (preferred) or just slightly above what the monitors will draw.

Check to see how many amps the monitors draw, add them up, and get a fuse closest to that without going under.

For the most part, I like to use ATC fuses and use insulated female disconnect terminals for fusing along the wire. Walmart and most electronic stores also have quick splice fuse holders that work well too (for about $2)

Never send your ducks to eagle school.
The difference between ordinary and extraordinary is that little extra.
The 3Ls of life: Learn from the Past, Live for the Present, Look to the Future.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Sunday, August 14, 2022 • Copyright © 1999-2022, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer