How would I identify this command start

Home / the12volt's Install Bay / Car Security and Convenience / How would I identify this command start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

undersc0re

Member - Posts: 3

Joined: January 09, 2006

Location: Canada

Posted: September 20, 2006 at 6:29 PM / IP Logged

I pulled out my command start unit after grounding out the temp sensor and realizing the thing works! The thing is I did not get a remote with it when I aquired the vehicle. Now I openned it up and wrote down some numbers I found but I do not see a model number. If someone could help me that would be great! This is what I found KIL 500A3 I also found 500A3 component, and command start 1997, and a square chip near the middle with a white sticker on it that says, 245 SW00 V1.0. The serial number on this unit is *S011282464*. Thanks.

Back to Top

ck auto

Copper - Posts: 257

Joined: September 20, 2003

Location: Canada

Posted: September 21, 2006 at 9:52 PM / IP Logged

command start went out of buisness a couple of years ago what part of canada are you in i might be able to help you out

good luck

kirk

Back to Top

undersc0re

Member - Posts: 3

Joined: January 09, 2006

Location: Canada

Posted: September 22, 2006 at 5:20 AM / IP Logged

I am in Winnipeg, I might have someone with an old remote from a junked truck that might work, I will find out next week. Other than that I can't find one online yet....I am watching ebay though....LOL. I noticed a 555 remote is the most common so I would assume I need that one.

Back to Top

ck auto

Copper - Posts: 257

Joined: September 20, 2003

Location: Canada

Posted: September 22, 2006 at 7:32 PM / IP Logged

certified radio in edmonton 780-433-3191 sell replacements about $50

good luck

kirk

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

How would I identify this command start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.