Interior lights

Home / the12volt's Install Bay / Car Security and Convenience / Interior lights (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

vpsr6

Member - Posts: 9

Joined: September 12, 2006

Location: United States

Posted: October 23, 2006 at 8:35 AM / IP Logged

I just installed a Python 1400 in my '05 F150 XLT. I thought the interior lights were triggered off of the door locks but apparently not. I have read some conflicting posts about the dome light supervision output from the Python. Can I connect it directly to the blk/blu dome light supervision in the truck? or do I need a relay? Any info would be helpful.

Back to Top

genehewett

Copper - Posts: 151

Joined: December 12, 2003

Location: Georgia, United States

Posted: October 23, 2006 at 11:12 AM / IP Logged

If you cant measure the current required to activate the circuit then you should use a relay.

Back to Top

vpsr6

Member - Posts: 9

Joined: September 12, 2006

Location: United States

Posted: October 23, 2006 at 3:33 PM / IP Logged

It looks like the output from the Python is 200ma on the dome control, so I guess I need to cut the blk/blu dome wire in the truck and measure the current drawn when all the light are on??

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Interior lights

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.