Removing ribbon for Avic N2

Home / the12volt's Install Bay / Car Audio / Removing ribbon for Avic N2 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dkeshish

Copper - Posts: 92

Joined: December 01, 2005

Location: United States

Posted: December 05, 2006 at 7:07 PM / IP Logged

Hello guys I have purchased the ribbon that replaces the one in the AVIC N2 and have my head unit apart. I have managed to take the ribbon off of one side (motherboard side) and now I am trying to get the ribbon unattached from the screen side. Any help? How do I get back there? The screen is on tracks... Any help would be appreciated. THANKS

Back to Top

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: December 05, 2006 at 7:33 PM / IP Logged

It would have been much easier if you had opened the screen half way (level) before you started. But don't sweat it. just grab it on the corners and pull it out. once you get it out there are 3 screws on the backside of the screen at the top and 2 screws on each side. you may have to try several jewlers screwdrivers before you find one to fit properly.

Back to Top

dkeshish

Copper - Posts: 92

Joined: December 01, 2005

Location: United States

Posted: December 06, 2006 at 2:23 PM / IP Logged

Thanks man, Pull what from the corners? The screen?

Back to Top

i am an idiot

Platinum - Posts: 13,667

Joined: September 21, 2006

Location: Louisiana, United States

Posted: December 06, 2006 at 8:13 PM / IP Logged

Yes grab the screen and pull it out it seems like it won't come out but it will.

Back to Top

dkeshish

Copper - Posts: 92

Joined: December 01, 2005

Location: United States

Posted: December 07, 2006 at 6:13 PM / IP Logged

ok well I did that and was able to replace the ribbon. One problem, after putting everything back together I push the open/close button the sound goes off (that annoying beep/ding) but the screen doesnt come out... Any suggestions? THANKS

Back to Top

dkeshish

Copper - Posts: 92

Joined: December 01, 2005

Location: United States

Posted: December 10, 2006 at 3:33 AM / IP Logged

all fixed!!! Thank you once again. I had a slight portion of the ribbon out, opened the whole thing up again and re inserted the ribbon. it works now!!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Removing ribbon for Avic N2

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.