06 magnum remote start

ya thats what im thinking tommorow, ill have to go and get a new bypass.  I doubled and trippled checked all my connections and wiring and its all right meh......

I hope its the bypass *crosses fingers*

Ok here an update.

If your doing a 06 and up Magnum, make sure your fortin Pats 04+ bypass is ver.5.0 or greater.

Also the ground out the bypass(not the GWR) to the Violet/Orange wire, that wire is ground through the mux wire and works better.

After i tooled around for half the day with a new bypass that dint change anything, i was just about to goto the resistor method, but i remembered a simmilar problem awhile back and grounding out through the violet/orange wire cured it, so i gave it a shot. Wallah works great now.

Thanks for all the replies

 Chryslers!!!!!