2005 Impala security light

Home / the12volt's Install Bay / Car Security and Convenience / 2005 Impala security light (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

russ lund

Copper - Posts: 188

Joined: April 07, 2004

Location: United States

Posted: January 19, 2007 at 3:11 PM / IP Logged

I just installed a R/S in a 2005 Impala with only 1 hitch.The security light comes on after turning the ign key to on and strpping on the brake.I used 2 resistors to make 14k ohms and used a Bosch relay.I have the - out when running to pin 85 and the ign 1 to pin 86.The pin to the switch is 87a and the BCM side is pin 30.and the resistor is on pin 87.The other side of the resistor is to the black wire in the passlock harness. Any help please! Russ.

BigDog

Back to Top

ziggyb222

Silver - Posts: 593

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 04, 2004

Location: Maine, United States

Posted: January 19, 2007 at 3:22 PM / IP Logged

Get a PLJX from Bypasskits.com.. It is alot more reliable and you do not have to cut the R code wire to install it. Just a thought....

Back to Top

au5599

Copper - Posts: 94

Joined: December 22, 2005

Location: United States

Posted: January 19, 2007 at 8:14 PM / IP Logged

your problem is simple, to do it properly you need to use 2 relays. I played around before with doing it a few different ways.

Your safest bet so you have a reliable start all the time get the PLJX it makes a huge difference

Street Dreams Car Club

93 GRAND CARAVAN SE / Astro

Team New York SS3-4 06 & SM3-4 07 DB Drag World Finals

2003 Chevy Suburban LT / 98 GTP

Back to Top

green6767

Copper - Posts: 209

Joined: October 28, 2005

Location: United States

Posted: January 19, 2007 at 8:33 PM / IP Logged

You can also do a permanant passlock II bypass without any relays. All you will need is a multimeter and to find the right resistor value. do a search for passlock bypass. Its just an option.....

Shaun, we are the same height, that is neat!

12V Installation Technician for Honda, Dodge, Chrysler, Toyota and Jeep.

Back to Top

russ lund

Copper - Posts: 188

Joined: April 07, 2004

Location: United States

Posted: January 20, 2007 at 9:32 AM / IP Logged

Normally I do use kits from Bypass.com But I was in a pinch.I'll just have to get one ordered.Russ

BigDog

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2005 Impala security light

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.