Wiring Harness Problem

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / Wiring Harness Problem (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

phezmann

Member - Posts: 3

Joined: February 08, 2003

Location: United States

Posted: February 08, 2003 at 7:55 PM / IP Logged

I have a gentex auto dimming mirror (156) that I pulled out of a 1997 Ford Explorer. I am splicing it into my 1994 Dodge Dakota. I will have no problem locating the necessary wires in the vehicle, however, I am having problem figuring out what wire is what on the mirror. It does not have a compass or temp guage or lights, so it's not an expensive- like mirror. The mirror has a 6 pin wire harness (only 1-5 are used, 6 is open). The colors of the wires are as followed in order 1-5:

1- RED / Yellow stripe

2- GREEN/ YELLOW stripe

3- Black

4- BLACK/ Pink stripe

5- WHITE/ Violet stripe

6- OPEN NOT USED

On the tab for the harness it says H JST 0

Any information you can give me would be REALLY appreciated. If any, Please.

Thanks so much for your help.

1994 Dodge Dakota V8 4x4 SLT Club Cab--- A project truck with some awesome stuff.

Back to Top

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: February 08, 2003 at 9:42 PM / IP Logged

Ok this is basically what I have found online. First the two links are for the mirror but for different vehicles. Use this one to identify what pins are what http://www.p71interceptor.com/gentexmirror/. Then use this as a diagram as what to look for http://www.mmsport.s5.com/Compassmirror.html. Basically the pins "should" be the same but the wire colors may be different. You will have to tear down the mirror to find the plug on the mirror and take the wiring harness that is going into the mirror and figure out what wires are what from what pin and the diagram from the first link should hopefully supply you with the wiring info you will need. On the first power up use a really small fuse just in case. You also might want to look at a chiltons and see if it has the wiring info for the mirror. Also here are a couple of other links that I found: http://www.audiworld.com/tech/int33.shtml http://www.mitocorp.com/mirror_installation.htm Hope this helps.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Wiring Harness Problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.