the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

phoenix gold sound system


Post ReplyPost New Topic
< Prev Topic Next Topic >
smgreen20 
Member - Posts: 36
Member spacespace
Joined: October 11, 2006
Location: United States
Posted: June 20, 2007 at 8:02 PM / IP Logged  

Both those amps are power hungry. Use 0-guage to a distro, then 2-guage out, The 1200.1 will do about1250 wrms at 4 ohms. I'd wire each sub in series to itself, then parellel the tree togather for a 2.66 ohm load. These amps are loosey regulated, so they'll actually increase about 15-20% at 2 ohms, so you'll be fine on the power to each sub.  I believe you need 80 amp fuses for each amp.

I'm a PG freak, come join us and post all your PG Qs here.

Along w/this set up.

www.phoenixphorum.com

Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer