the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

tach and door trigger


Post ReplyPost New Topic
< Prev Topic Next Topic >
vstyle444 
Member - Posts: 11
Member spacespace
Joined: March 10, 2002
Location: United States
Posted: June 23, 2007 at 2:13 AM / IP Logged  
can someone help me please
i have a 01 lexus gs300 i'm stuck on the tach and door trigger wire..for the door trigger it say Door Trigger Body Module Driver's Kick 25 Pin Connector #13 Delay Dome Light but i cant find it and the tach say BLACK / YELLOW Module under Hood Driver's Side 28 Pin Connector Pin16 but its a different color
enice 
Silver - Posts: 857
Silver spacespace
Joined: March 05, 2006
Location: New York, United States
Posted: June 23, 2007 at 8:45 AM / IP Logged  
To beat the dome light delay, go to each door module located in each door. The wires are : RED / white for drivers door, RED / green for front right door, RED / white for left rear door, and RED / yellow for right rear door. the tach is Located inside the ECU box which is under hood on the drivers side. Victory technologies states that it is pin 16 for the tach.  Not saying that either is right , thats why you must test  with a DMM before connecting.  Good Luck
slab42 
Copper - Posts: 56
Copper spacespace
Joined: March 18, 2003
Location: United States
Posted: June 26, 2007 at 3:00 PM / IP Logged  
as far as the tach wire goes, just connect to the fuel injector.  I do it to just about every car.  Use the wire that is not common on all injectors (i.e. if the injectors on bank 1 were wired like this:  INJ1- white & black, INJ2- white & purple, INJ3 - white & blue, you would connect to any injector, but the wire that is NOT white)
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: June 26, 2007 at 4:44 PM / IP Logged  
TACH SIGNAL SEE NOTES     
 For the 3L, use any of the 3 coil wires at the igniter under the hood on the driver's shock tower. They are WHITE, BLACK and BLACK/ RED. On the 4.3L, use one of the injectors.
 FUEL INJECTOR Wire opposite of BLACK/ white At any injector on engine   AC 

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer