proximity module

Home / the12volt's Install Bay / Motorcycle Electronics / proximity module (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

hawkstar2

Member - Posts: 3

Joined: June 12, 2007

Location: United States

Posted: June 23, 2007 at 11:16 AM / IP Logged

Has anyone added a proximity module to a factory installed alarm on a late model Harley Davidson Motorcycle

Need help conecting the Green and Blue wires

Thanks Ian

Hawkstar2

Back to Top

slab42

Copper - Posts: 56

Joined: March 18, 2003

Location: United States

Posted: June 26, 2007 at 3:01 PM / IP Logged

I have not, but I would imagine that if you could find the alarm brain, or the tilt sensor (most motorcycle alarms have a tilt sensor) you could determine which wire triggers the alarm, and just hook the two output wires from the prox sensor to that.

Back to Top

hawkstar2

Member - Posts: 3

Joined: June 12, 2007

Location: United States

Posted: June 26, 2007 at 5:40 PM / IP Logged

The Harley Module is called a TSSM it incorporates the turn signals and a tilt sensor built in ,the wires on the TSSM go as follows

1Battery

2 Ignition

3 Serial Data link

4Security Indicator

5 Left turn feed

6 Right turn feed

7 right turn sw input

8 Left turn SW input

9 Start relay control

10 Ignition enable

11 Alarm Signal

12 Ground

Any thoughts would really help

Thanks Ian

Hawkstar2

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: June 27, 2007 at 7:52 PM / IP Logged

The tilt sensor would be your only option for a trigger input. You will want to diode isolate the 2 from one another.

Back to Top

hawkstar2

Member - Posts: 3

Joined: June 12, 2007

Location: United States

Posted: June 28, 2007 at 8:59 AM / IP Logged

Do you think That if I install the Viper Controler that it can be wired to turn on when the Harley system is activated ,I would then hook the proximity senseor into the Viper controller

Hawkstar2

Back to Top

KarTuneMan

Platinum - Posts: 7,056

Joined: December 14, 2004

Location: Isle Of Man

Posted: June 28, 2007 at 12:18 PM / IP Logged

What I think....... The prox sensor is going to give you a headache.

People that do not have motorcycles LOVE to get close and look. I know I do! (I don't have a bike)

What you want to do, I think could be done.....But I do not know how...

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

proximity module

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.