what clifford alarm for manual trans

Home / the12volt's Install Bay / Car Security and Convenience / what clifford alarm for manual trans (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 02, 2007 at 12:59 PM / IP Logged

The V is a IV with lousy software* and install support which fails to mention what the GREEN/ black does! Also doesn't explain park brake or rev standoff! It's the same casing but made in China!

* If you use Wiz it won't prog tach; if you do it manually beforehand it wipes it and you have to do it again, sometimes it will also put the alarm into passive arm and lock and change the auxilliary output settings! In fact sometimes you can't even enter crank run parameters. Running a laptop with XP and wiz 2.2 can be a nightmare, I've taken an old Dell and reconfigured it to run Win98 and it seems to cure some of the problems. I was unofficialy told on Friday by DEI UK that they will be using Bitwriter** only in future.

You can buy Man I in UK which converts other units to manual ready mode.

** The instructions are even wrong on this, I got an apology from the UK CEO!

Back to Top

Evolution-UK

Copper - Posts: 192

Joined: June 19, 2005

Location: United Kingdom

Posted: July 03, 2007 at 3:48 PM / IP Logged

Clifford Canada do a unit which allows use of a standard remote start unit onto a manual trans. car. Not sure of the part number but it is in this forum somewhere.

UK Intellistart 4 units can be fitted onto Manual/Auto tranny cars.

Back to Top

xtremeaudio

Copper - Posts: 174

Joined: August 30, 2004

Location: United States

Posted: July 04, 2007 at 5:15 AM / IP Logged

you may check out the clifoord g5 it work on manual/auto

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 04, 2007 at 9:25 AM / IP Logged

It's a Clifford part which wil obviously work with DEI product called an MTM1

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

what clifford alarm for manual trans

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.