2005 dodge ram, alarm/remote start

Home / the12volt's Install Bay / Car Security and Convenience / 2005 dodge ram, alarm/remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

wire4veins

Copper - Posts: 97

Joined: November 25, 2002

Location: United States

Posted: July 27, 2007 at 3:00 AM / IP Logged

I have done four of these 2005 Dodge rams installing a Alarm/Start combo in each one. I used the Autopage RS-727s and one RS-1000OLED on them. I am now on my fifth one and am having a false due to the door triggers(Icon on the remote appears roughly 2-3 minutes after arming). I have checked the triggers and the diodes for correst position and everything checks out good. Delayed dome light ignore is programmed also. Has anyone had any trouble with one of these Dodges. I obviously have done all five now the same four with no problems which is what really gets me! I have seen a few posts on here for single wire triggers which I would like to try if anyone knows color/location. Thanks in advance.

Wires I am using:

Door Trigger - see notes

Notes: The LF door is gray/black at the DDM, brown 16 pin plug, pin 13. The RF door is tan/white or BLACK/ white at the PDM, brown 16 pin plug, pin 13. The LR door is lt. blue/black at the BCM, pink plug, pin 15. The RR door is lt. GREEN/ black at the BCM, pink plug, pin 14. Use all four wires and diode isolate each.

"D" - Owner/MECP Master Installer

Precision Audio - Utah

"You might find it Cheaper...but you won't find it better."

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: July 27, 2007 at 8:33 AM / IP Logged

I have read, and understand that your on your 5th identical unit. But have you considered goin into the kicks for the door pins? Left side in the same connector as the lock wires. The right side in a white connector. Like I said, maybe check this and try it. These can also be found behind the guage cluster. in plug C1

LF is Purple

RF is PURPLE / grey

RF is PURPLE / white

RR is purple / YELLOW

Velocity Motors

Moderator - Posts: 12,488

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: July 27, 2007 at 9:26 AM / IP Logged

For the Dodge door triggers I would also use a relay to isolate the triggers from each other along with the diodes.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

wire4veins

Copper - Posts: 97

Joined: November 25, 2002

Location: United States

Posted: July 29, 2007 at 11:35 AM / IP Logged

I have all of those wire connected in the kick panels with diodes. I disconnected one of the trigger wires and with a DVM on it it shows 12v about a minute after the door is closed which is about when it triggers the alarm.

wire4veins

"D"

Precision Autosound - Owner

MECP Master Installer

enice

Silver - Posts: 857

Joined: March 05, 2006

Location: New York, United States

Posted: July 29, 2007 at 11:42 AM / IP Logged

Looks like the computer turns off causing a false alarm. What you may have to do is put a diode in between the actual door triggers and then connect your door trigger input wires on the side thats after the diode not before the diode. Use DOC 1076. Its quite common on fords with the GEM but may also apply to other platforms.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 31, 2007 at 3:21 AM / IP Logged

enice try my favourite VW's the trunk light, also Fords with GEM box.

swerks

Copper - Posts: 224

Joined: January 12, 2003

Location: Canada

Posted: July 31, 2007 at 10:53 AM / IP Logged

have u cut the pin wires and placed a diode in each one cathode towards the door?

Steve Sverdahl

Swerksound Auto Electric

Red Deer Alberta

wire4veins

Copper - Posts: 97

Joined: November 25, 2002

Location: United States

Posted: August 02, 2007 at 10:24 PM / IP Logged

Thanks for all your advice. One of the diodes was bad apon testing it.

wire4veins

"D"

Precision Autosound - Owner

MECP Master Installer

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2005 dodge ram, alarm/remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.