jack finks

Home / the12volt's Install Bay / Car Audio / jack finks (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

jfinks

Copper - Posts: 76

Joined: May 31, 2007

Location: United States

Posted: September 27, 2007 at 12:48 AM / IP Logged

haemphyst wrote:

Dave eats his words... Yeah, you're right up there in the "He's lost his mind..." crowd. Thin air up here, huh, Jack?

Thats what the oxygen is for...I do fear when I'm locked away in the lab that I might go too far...so I'm showing this to see if I haven't talked myself into bad ideas...but I have to admit I like pushing the envolope...

haemphyst wrote:

running the white cone 12 inch woofers from some OLD Pioneer 12's

Now thats old school...Bob didn't I have those too at some point?

Back to Top

jfinks

Copper - Posts: 76

Joined: May 31, 2007

Location: United States

Posted: October 27, 2007 at 9:57 PM / IP Logged

Heres the lastest pictures though not directly related to the stereo. The entire front half of the car is based around the front beam. So here are pictures of the VW drop spindles that I had modifies to accept Porsche bearings and hubs so I can fit 993 Big Red brakes on. The Ferrarie (sp) in the bay of TCSS has these very same brakes from Bremo.

jack finks - Page 4 - Last Post -- posted image.

Here are the Porsche Bearing on it

jack finks - Page 4 - Last Post -- posted image.

With the hubs mounted

jack finks - Page 4 - Last Post -- posted image.

And an Idea whats to come. I'll order the rotors this week and moch up the caliper brakets next week end

jack finks - Page 4 - Last Post -- posted image.

Fun fun fun

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

jack finks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.