how do i hook up my remote trunk open?

Home / the12volt's Install Bay / Car Security and Convenience / how do i hook up my remote trunk open? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

luckydawg003

Copper - Posts: 63

Joined: August 30, 2007

Location: United States

Posted: September 09, 2007 at 5:38 PM / IP Logged

I have a 07 mustang, how do I hook up the alarm remote to open my trunk? I have factory keyless-trunk open now.

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: September 09, 2007 at 8:06 PM / IP Logged

The smart junction box is in the pass. kick. Find a wht/prpl (NEG)- trunk pop, AND a wht/pnk (NEG)- trunk disarm. Pulse both neagtive, and diode isolate.

Back to Top

luckydawg003

Copper - Posts: 63

Joined: August 30, 2007

Location: United States

Posted: September 24, 2007 at 10:49 PM / IP Logged

Ok now I'm confused. From the alarm brain I have a -RED / white wire for trunk release. -blue wire for trunk input or trunk trigger. From the car I now have trunkpin +WHITE/ yellow(not sure I should use this since its positive), trunk release -WHITE/ violet, or trunk disarm or trunk pin switch -WHITE/ pink. what do I need to diode or put a relay on? Or can I just hook up the two trunk -wires and call it good?

Back to Top

sarcomax

Copper - Posts: 276

Joined: November 09, 2005

Location: California, United States

Posted: September 25, 2007 at 1:56 PM / IP Logged

The trunk pin is a trigger for the alarm that notifies you that your trunk has been opened. Depending on your alarm you may need to use a relay to boost the ground signal. the diodes would be there to keep the two trunk release wires from seeing each other.

Back to Top

luckydawg003

Copper - Posts: 63

Joined: August 30, 2007

Location: United States

Posted: September 25, 2007 at 8:17 PM / IP Logged

Ok So I hooked up the alarms -RED / white trunk release to my cars trunk release -WHITE/ violet. So thats good. Heres my problem. Alarm trunk trigger -blue....cars trunk pin +WHITE/ yellow. Couldn't figure out the relay thing So I hooked up the door trigger +violet to the cars +WHITE/ yellow. Any problems with this. Also I wasn't sure where to connect my tach signal on the injector. So I just tagged it to the first grey injector wire.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

how do i hook up my remote trunk open?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.