the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

clifford's lcd remote


Post ReplyPost New Topic
< Prev Topic Next Topic >
adrosa 
Member - Posts: 1
Member spacespace
Joined: September 17, 2007
Location: Washington, United States
Posted: September 18, 2007 at 7:25 PM / IP Logged  

Hi,

I have recently got a Clifford Matrix 12.5X installed in my car. I added a Glass breakage sensor (let me call this GBS in this post) and connected that to one of  the available auxillary sensor inputs. I noticed that whenever the GBS trips, it gets reported as a Zone 4 alarm in the LCD remote and the Glass Breakage icon does not illuminate. I understand that Auxillary input 4 triggers might be needed to be programmed in the LCD remote to flash the Glass Breakage icon. If my understanding is correct. Would anyone be able tell me how to do it or at least tell me that making an Auxially input flash a certain icon in the LCD remote is futile.

Thanks a bunch.

captainzab 
Silver - Posts: 606
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: February 09, 2005
Location: United States
Posted: September 18, 2007 at 8:14 PM / IP Logged  
getting the glass break sensor to display as zone 4 on your remote requires the bitwriter. (not possible to program by hand)
take it to the shop, they should have done that when they hooked up your alarm
Note: You Always Dont Get What You Pay For.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer