2000 4runner viper 791

ahhhh...thanks for the advise.. well the visible wires are BLCK/RED, BLK/WHITE and Black. Should I wrap the BLACK/ red around front of key cynlinder? LAST BUT NOT LEAST, I cannot adjust the SHOCK sensativity. i try to adjust by hitting the windshield, doors and OPENING the door while armed. The alarm will not go off. I have the door trigger connected or should it be connected to the domelite supervision? Other than that crap, I have it under control mostly. Thanks again for everyones help.

it should say, wrap the thin wire around the key cylinder several time, then have one end connected to the black, the other end to BLACK/ red. Dont need to use BLACK/ white if your alarm is not going off, then its probably in Nuisance prevention mode. just reset the alarm by turning the ignition on then off. read more about it in the manual your door trigger is correct, dont need to use domelight.Note: You Always Dont Get What You Pay For.

Captainzab, The 556U's manual sux!! See, I thought I had to have the KEYSENSE wire tapped. BUT now I know. I bet $100 it will work now since I will do that. I have some telephone wire very thin strand. 22-25guage. I HOPE this works. I have the shocksensor mounted on the steering column very secure. Now last night, some dummy bumped my truck and it WENT off immediately. But if I test it with the windows down and open the door, it does not go off. I will read the manual again but I dont think it is in Nuiance Prevention mode. I thought that was a good thing no?? Keep it from going off when planes, trains or whatever rides by. Oh well. Thank you for all of your help. I cannot wait to get off from work to TRY!!

nope..the door trigger does not trigger the alarm. I have the door OPEN and the alarm does not trigger!! What have I done?

HEADS UP YOU TOYOTA 4runner installers: The DOOR Trigger is WAY behind the FUSE box. GREEN w/black STRIPE. There are alot of green and black but the FUSE box up top is the door TRIGGER. The BYPASS: DO NOT USE THE 556U. USE BYPASS: 555XW much easier to use. I learned the hardway. Thanks to everyone who has help me with this LONG install. Thanks