the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

05 neon door locks


Post ReplyPost New Topic
< Prev Topic Next Topic >
jpinusmc 
Member - Posts: 22
Member spacespace
Joined: July 21, 2003
Location: California, United States
Posted: November 12, 2007 at 2:13 PM / IP Logged  

Okay, i ditched the 457c and went to relays for lock and unlock.  I have a 1K resistor for lock and a 250 for unlock.  Both have relays and are to the lt green wire in the door harness/kick panel. 

Lock works good.  Unlock works good.  Problem is, once the alarm is set off or the trunk is popped, every time the car is unlocked afterwards the trunk pops.   If i turn on the ignition and clear the alarm, things work good again until the alarm is set off.  Any ideas?

swerve 
Copper - Posts: 149
Copper spacespace
Joined: January 10, 2007
Location: Oregon, United States
Posted: November 12, 2007 at 2:17 PM / IP Logged  
what kind of alarm? and did your neon have the factory alarm installed?
git yer swerve on!
jpinusmc 
Member - Posts: 22
Member spacespace
Joined: July 21, 2003
Location: California, United States
Posted: November 12, 2007 at 2:21 PM / IP Logged  
Sorry, it is an autopage rs-900.  The vehicle has the factory alarm installed.  I used the resistors for that setup earlier, and every time i would unlock the car the trunk would pop.  Switched to the non-factory alarm setup and this is where I am.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer