two way switch

Home / the12volt's Install Bay / General Discussion / two way switch (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

porterda

Member - Posts: 4

Joined: January 30, 2009

Posted: January 30, 2009 at 4:15 AM / IP Logged

does anyone have a wiring diagram that detail the best way to control a device eg light, water pump etc, from two switches, eg in car and engine bay. ideally i'd also like an indicator light at both switches that would illuminate whenever the device is on.

Back to Top

porterda

Member - Posts: 4

Joined: January 30, 2009

Posted: January 31, 2009 at 8:36 PM / IP Logged

Just in case anyone else needs to do something similiar, here is a basic example of a the solution. I was planning the use relays in the switching but will now use only one for the power.

http://www.rkm.com.au/ANIMATIONS/animation-three-way-switch.html

Back to Top

porterda

Member - Posts: 4

Joined: January 30, 2009

Posted: January 31, 2009 at 8:41 PM / IP Logged

for some unknown reason the link as changing the address to

http://www.rkm.com.au/ANIMATIonS/animation-three-way-switch.html

change ANIMATIonS to ANIMATIONS and the address works fine.

Back to Top

porterda

Member - Posts: 4

Joined: January 30, 2009

Posted: January 31, 2009 at 8:43 PM / IP Logged

should be

/ANIMATIONS/

in capitals

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 08, 2009 at 6:33 AM / IP Logged

Just wire up 2 switches to your relay, 1 in engine bay and one in car.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

two way switch

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.