Control from 2 locations

Home / the12volt's Install Bay / General Discussion / Control from 2 locations

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

nick velho

Member - Posts: 2

Joined: March 20, 2015

Location: California, United States

Posted: March 20, 2015 at 11:59 PM / IP Logged

Greetings Forum,

I would like to control a small 12v pump from either the back or the front of a boat. Something like a light in a hallway. On or off from ether end. And I would like to do it with lighted toggle switchs if possible . I just read an old post that used SPDT On On switchs but I fail to see the circuit working from both ends. It very well could be me. Can anyone tell me the best way to do that or re-illustrate it ?

Thanks Nick

Nick Velho

Back to Top

oldspark

Gold - Posts: 4,913

Joined: November 03, 2008

Location: Australia

Posted: March 21, 2015 at 1:31 AM / IP Logged

Maybe here or here else here if the latter link doesn't show an image and noting that L = +12V and N = GND.

The switchlight +12V is taken from the pump's +12V.

Back to Top

nick velho

Member - Posts: 2

Joined: March 20, 2015

Location: California, United States

Posted: March 21, 2015 at 10:37 PM / IP Logged

I can see it clearly now . I'm looking foward to setting it up. Thank you very much for your reply Oldspark !

Nick

Nick Velho

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.