4020 ohm resistors

Home / the12volt's Install Bay / General Discussion / 4020 ohm resistors (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Legrones

Copper - Posts: 75

Joined: April 17, 2003

Location: United States

Posted: December 23, 2006 at 1:05 PM / IP Logged

hi i am looking for a 4020 ohm resistor i have a gm vats system resistor pack but im not reading 4020 on my dmm..when looking for that 4020 will it show up that or no 04.0 like this

Dale / Cory

Back to Top

geepherder

Platinum - Posts: 3,668

This member consistently provides reliable information

Joined: October 27, 2003

Posted: December 23, 2006 at 4:31 PM / IP Logged

That isn't a value resistor for VATS, but the reading may appear differently depending on the meter, and what scale it is set to. Since you're measuring a value in the thousands, you will set it to a scale in the thousands that's capable of measuring the value you're looking for (20K ohms for example instead of 2K ohms). If you got a reading of 4.02, this is in the 20K ohm scale, meaning a value of 4,020 ohms. If you measured in the 2M ohms scale, your reading would be .004. Understand?

My ex once told me I have a perfect face for radio.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

4020 ohm resistors

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.