the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2007 jeep liberty cruise


Post ReplyPost New Topic
< Prev Topic Next Topic >
smcshark 
Member - Posts: 34
Member spacespace
Joined: June 22, 2008
Location: Ontario, Canada
Posted: September 18, 2008 at 2:14 PM / IP Logged  

Does anyone have any idea aside from a peddle pull on how to install a acruise on 2007 Jeep liberty with Drive by wire / electronic gas peddle ? The local Dodge dealer is driving me nuts.....

Automotive Electronic Specialist
sparkie 
Platinum - Posts: 2,061
Platinum spacespace
Joined: November 06, 2003
Location: Canada
Posted: September 18, 2008 at 6:08 PM / IP Logged  
I've only been able to do these vehicles with a pedal pull. They aren't too difficult, but you may have to install a magnetic speed pulse generator on the front drive shaft. If it is a manual transmission, installing a clutch switch is a real pain. Very little room to work in. Just make sure if you decide to do it add enough to the price to make it worth while.
sparky
closmendez 
Member - Posts: 8
Member spacespace
Joined: February 18, 2006
Location: United States
Posted: October 26, 2008 at 1:00 PM / IP Logged  

Just add a Factory switch from the Dealers part dept., You will have to add the pins to the clock spring. To gain access to the clock spring remove the air bag. Just adding a switch works. I work for a 5 star chrylse/mopar/jeep dealer. I install all the aftermarket accessories.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer