activation switch, 1995 Civic SI

Home / the12volt's Install Bay / Cruise Controls / activation switch, 1995 Civic SI (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

King_Midas

Member - Posts: 35

Joined: January 03, 2004

Location: Canada

Posted: January 03, 2006 at 5:14 PM / IP Logged

I had an engine swap done on my car, from the D16Z6 to a B18B, so the cruise control has been removed.

this may sound like a really odd question, but how can I use the cruise control switch (on the dash) to turn on my foglights? I was thinking of using the hot wire that turns on the green light on the switch, but I'm not sure if I would need to use a relay or not.

Back to Top

xtremca2003

Member - Posts: 37

Joined: January 02, 2006

Location: United States

Posted: January 03, 2006 at 5:18 PM / IP Logged

If you go to the switch and find the output (not sure if it will be + or -, then take that to a relay as the relay turnon and power the lights.

chris

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

activation switch, 1995 Civic SI

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.