first attempt at sub box
Home /
the12volt's Install Bay /
Fiberglass, Fabrication, and Interiors / first attempt at sub box (
Topic Closed)
Topic Closed)
Members
Search
Register
Login
Posted: November 10, 2008 at 2:10 PM / IP Logged
i made this for a 88 crx. its my first time working with fiberglass. i didn't have a good area to work it but i think it turned out decent. also i have no experience painting, but it turned out pretty good. i followed velocity motors write up on how to make a fiberglas box. ill update more as i progress in my project :)
Posted: November 10, 2008 at 3:51 PM / IP Logged
Posted: November 10, 2008 at 4:14 PM / IP Logged
Posted: November 10, 2008 at 4:20 PM / IP Logged
emptypockets426 wrote:
|
that and all the layers of matting to add to the inside so it'll be strong enough. but that part we cant see. we can just see the fist stage here, still not cured, and with out reinforcement on the inside yet. good shape so far. kinda looks like the same shape i did for an enclosure that had 1 15" and 2 10" woofers. seperate chambers but one enclosure.
Sorry, you can NOT post a reply.
This topic is closed.
Printable version
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com 
Thursday, April 25, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Thursday, April 25, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
