extending fascia with polyester/glasfiber

people... Got a little question for you guys about polyester/glasfiber I have a fiat punto MK2 (1.2 16v ELX) from november 99, Like most of you will know this has room for a 1din HU, but I want to loose that Idea, so a 2din HU has to be fitted in there,I have the metal part that holds the HU already in place in a 2nd vent panel I got from the scrapyard, But the front of the radio had to be about 4 more centimeters further as the standard is/was Because of this I have to reform/design the panel around/above the HU, otherwise I will look onto the metal case that holds the radio, and as you al can agree that's not really nice, I already got some glasfiber mats and some polyester filler, so I think I have the right stuff to get this done, but how? So, my question to you is does anybody has an idea to get this done I'll bet someone does, :P haha. I have never worked with this stuff and never attemped something like this so I do not know where and how to start. Now something about this part that has to be reshaped. This panel that forms like a U around the top and half way down the sides of the HU has to be extended to the edge of the metal case that holds the radio, has someone got an Idea or manual to get this done,...   Yeah yeah pics are comming :P Hope to hear it soon. Down here is a link (picture) how the dual din case is fitted in the 2nd vent panel, The top part what is nicely shaped is the part that has to be reshaped/extended. https://i1239.photobucket.com/albums/ff513/Rickyklu/12voltforum1_zps307d83de.jpg?t=1357780505 This is without that panel, now you see the screwholes that hold the vents panel against the dashboard, So to ad something to my question It really has to be a extension of that particular panel, I have to be able to take it on and of when I want to, otherwise I couldnt fit the vents to the dash, and I dont this that is good for the coming alpine HU https://i1239.photobucket.com/albums/ff513/Rickyklu/IMG_0197_zps43b91bc8.jpg?t=1357773588 https://i1239.photobucket.com/albums/ff513/Rickyklu/IMG_0198_zps54a4d12d.jpg I have tried to get some shape with some ducktape but I didnt convince my self to accept it :P and give it a try! https://i1239.photobucket.com/albums/ff513/Rickyklu/IMG_0201_zps2c162ea9.jpg If there isnt enough information pls contact me and I'll provide you with it! dont bother to ask. Thx in advance Rick van Eijk netherlands, the

wrap the whole panel in aluminum foil to keep the fiberglass from leaking through and sticking to the plastic. then stretch some sort of fabric over the area you want to fill with the fiberglass. make sure its stretched tight and its secure so it cant move. im not sure how you would make it removable so you can get to the screws in the back.

Hi thx for your reaction, good tip about the silverfoil,... does it really prevent the polyester, was searching for something like that, again thx But I think I have a other solution, really simpel actually haha I found some kind of foam that people use to stick their fake plants and flowers in,... I have to buy a big block of this stuf and simply press the original fascia to make my self a mold, and work my idea out by sort of shaving it to my personal taste of design,... grtz