the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

3d printer for enclosures?


Post ReplyPost New Topic
< Prev Topic Next Topic >
p40whk 
Copper - Posts: 50
Copper spacespace
Joined: April 07, 2009
Location: Kentucky, United States
Posted: February 21, 2013 at 11:40 AM / IP Logged  
Anyone consider using one of the 3D Printer services for designing and making an enclosure? It may be cost prohibitive at the moment but I've seen some amazing things come from one of those printers and you could do an endless variety of shapes.
rubn1out 
Member - Posts: 5
Member spacespace
Joined: October 15, 2010
Location: Maryland, United States
Posted: June 08, 2013 at 1:10 AM / IP Logged  

Check out Jay Leno.he's got it down!

http://www.popularmechanics.com/cars/jay-leno/technology/4320759

L x W x H / 1728 = ?
D x 3.14 = C
brycegarrett 
Member - Posts: 1
Member spacespace
Joined: August 16, 2013
Location: Georgia, United States
Posted: August 16, 2013 at 5:43 AM / IP Logged  
Yes I am just new into 3d printing metal and it is really exciting to be into it. It is something which makes impossible things possible.
bellsracer 
Silver - Posts: 703
Silver spacespace
Joined: January 14, 2006
Location: United States
Posted: April 07, 2014 at 8:16 AM / IP Logged  

I'm back everyone! Wow it's been a LONG time since I was here... Well now back to the topic at hand (on screen?)

Our shop uses 3D printers for our production scooters for the same reason Leno does it: Simplify production. Mostly for body parts and non-structural stuff.

Printers are getting cheaper all the time and if you get the right software, it's a breeze to get things done. It's funny that the 3D Scanner by NextEngine was mentioned... We use it too. However our 3D printer is the GigaBot by re3D. $6,000 delivered and assembled. It works really well. We use autoCAD for our engineering side. Side note: You'll need some sort of slicing software to optimize the printing. There's lots of them out there, many for free. SIMPLE Slicer is a great one (albeit slow) due to ease of use.

One thing that wasn't mentioned was if the part IS wrong for some reason, we shred the part back down and use a filament maker to recycle the filament into a ready to use state again.

Ganbatte ne!

Never send your ducks to eagle school.
The difference between ordinary and extraordinary is that little extra.
The 3Ls of life: Learn from the Past, Live for the Present, Look to the Future.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer