starting box build

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / starting box build

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

terryengle2677

Member - Posts: 6

Joined: August 31, 2015

Location: Alabama, United States

Posted: September 08, 2015 at 8:39 PM / IP Logged

ok i am building a box for my 95 impala....i have some experience in this area but welcome all comments.....using 3/4 mdf to build vented box for 2 power t1 dual 2 15's.....idk if I'm going to use fiberglass to seal it but i have wood glue and screws I'm using.....dimensions as of now are h18" w40" d20" not sure on port width or placement yet.....will update with pics soon

Back to Top

terryengle2677

Member - Posts: 6

Joined: August 31, 2015

Location: Alabama, United States

Posted: September 09, 2015 at 11:05 PM / IP Logged

started the build today with help from my cousin

Back to Top

terryengle2677

Member - Posts: 6

Joined: August 31, 2015

Location: Alabama, United States

Posted: September 09, 2015 at 11:10 PM / IP Logged

Back to Top

terryengle2677

Member - Posts: 6

Joined: August 31, 2015

Location: Alabama, United States

Posted: September 09, 2015 at 11:12 PM / IP Logged

gonna calk it and carpet this weekend.....wanna test it out sound wise first

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.