Latex or Low Odor Box Building?

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / Latex or Low Odor Box Building? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

pfitz

Copper - Posts: 53

Joined: May 10, 2003

Location: Canada

Posted: December 12, 2004 at 5:28 PM / IP Logged

I saw some of the Audio guy's on one of those tv shows doing a complete custom trunk enclosure with this non toxic mix, they didn't have to wear any protective clothes or masks until the sanding. What is this stuff? I fiberglass quite a bit, not a problem in the summer when I can open the garage door and turn on some fans, but it's winter up here in canada, and that is no longer an option! This low odor non-toxic stuff would be ideal....if it is any good.

Anybody know what I am talking about?

Back to Top

Carbonb

Copper - Posts: 113

Joined: October 09, 2004

Location: United States

Posted: December 13, 2004 at 1:29 AM / IP Logged

Probably something very expensive. There are a lot of different types of epoxy's that can be used with fiberglass. I think I have seen some in a marine shop, forgot the brand but it was about $60 bucks a gallon. Then after that there were some parts that cost upwards of $100 bucks.

Back to Top

pfitz

Copper - Posts: 53

Joined: May 10, 2003

Location: Canada

Posted: December 15, 2004 at 2:56 PM / IP Logged

I have used the Marine Epoxy before when using foam molds, and it is far from low odor!

This is a new stuff that is being used?

Back to Top

Carbonb

Copper - Posts: 113

Joined: October 09, 2004

Location: United States

Posted: December 15, 2004 at 3:24 PM / IP Logged

Not sure, never heard of it. That would be really nice if it was affordable.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Latex or Low Odor Box Building?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.