fiberglassing door trim panels

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / fiberglassing door trim panels (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

916k

Member - Posts: 9

Joined: July 16, 2005

Location: United States

Posted: July 16, 2005 at 6:44 PM / IP Logged

OK to start off i would like to say that getting rid of the old vinyl on these doors is a pain in the a**,.... ok now that i got that out of the way, i would like to know if i should do the whole masking tape thing on these doors or not,& if you can tell me what to do next , ..........all i want these doors to look like is to have that fiberglass, gloss finish, after paint and everything... i am want the same stock design just fb'ed....

916k

Back to Top

Poormanq45

Silver - Posts: 597

Joined: October 27, 2004

Location: United States

Posted: July 16, 2005 at 9:11 PM / IP Logged

eek, you took the vinyl off already? YOu may have gotten away with just using bondo on it to smooth it out then sand it, then primer and paint it. That would be alot easier

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

fiberglassing door trim panels

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.