Making a Sub box Question

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / Making a Sub box Question (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

tazmn23

Member - Posts: 5

Joined: November 09, 2005

Posted: November 09, 2005 at 7:53 AM / IP Logged

I decided to make a sub box with all fiberglass. I only have one question though. I am going to put 1 10" sub in box molded to the side of my trunk like I see others doing, but my wuestion is.... How would we support it to the side of the trunk so it does not tip over/roll around when taking corners?

Thanks.

Tim

Back to Top

old49er

Member - Posts: 6

Joined: January 12, 2005

Location: United States

Posted: November 09, 2005 at 8:42 AM / IP Logged

well you can drill a hole and mount to the body

Back to Top

hobobasher

Copper - Posts: 66

Joined: September 23, 2005

Location: Rhode Island, United States

Posted: November 09, 2005 at 2:20 PM / IP Logged

dont secure it to the body unless you want a hold into your floor and risk puntuing your fuel tank or having a hole in your quater panel i wouldend recomend that so the panel you used to make a mold with screw it to if you have just carpet which alot of car companies like doing i would then say go from behind the carpet put a fasner into the enclosure then seal it up dont use a huge fasner i dont think you want it touchign your sub but yeah thats your best bet

Back to Top

hobobasher

Copper - Posts: 66

Joined: September 23, 2005

Location: Rhode Island, United States

Posted: November 09, 2005 at 2:21 PM / IP Logged

wow sorry about the double post sorry bout the typos

Back to Top

hobobasher

Copper - Posts: 66

Joined: September 23, 2005

Location: Rhode Island, United States

Posted: November 09, 2005 at 8:38 PM / IP Logged

yeah definatly thats accually a good idea nice job

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Making a Sub box Question

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.