mercedes bass

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / mercedes bass (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ndm

Member - Posts: 31

Joined: October 21, 2004

Location: United States

Posted: November 10, 2005 at 11:52 AM / IP Logged

https://www.the12volt.com/installbay/forum_posts.asp?tid=65991&PN=1&tpn=1

this is the link^

do it right the first time ....or do it again and again and again...

Back to Top

youngone

Silver - Posts: 269

Joined: September 28, 2005

Location: United States

Posted: November 18, 2005 at 6:10 AM / IP Logged

sounds like your going to have to get it there and locate the raduling area and investigate. if you are unable to get to the area then you need to put down alot of dynamait to dampin that raddling.

Want to know some good equipment- JL,Adire Audio,Mcintosh,Brax,Helix,Eclipse,JBL,RE,Dimoand Audio,Zapco, pritty much anything DYhon,Forbidden recommend

On the12volt you give some info and you get in

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

mercedes bass

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.