FG box with amp rack

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / FG box with amp rack (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

janaka

Member - Posts: 1

Joined: December 04, 2005

Location: Canada

Posted: December 04, 2005 at 9:36 PM / IP Logged

Hey guys;

I've been lurking this site for the last little while since i've been contemplating making a new box for my grand prix.

i'm looking at FG'ing a 12" L5 into a sealed box. the whole box will be MDF except for the top which will have the L5 tilted. I know i will be using a square form that will be held in place by 1/2" dowls (using 3/4 mdf). I will be wraping the frame with fleece.

i was then looking to use the sub's box as a platform to mount my amps. i was wondering if i can incorporate wrapping a piece of mdf in the size of the footprint of my amp on the 'top' of the box? i will again use dowls to place the mdf for the amp to be screwed to.

I was planning on doing the first layer of resin then adding a few layers of FG to strengthen it up.

Does it seem like i have my basis covered so far?

and is what i'm trying to propose make sense and is it feasible?

thank you for any help you can offer.

Back to Top

Teamrf

Gold - Posts: 1,031

Joined: January 13, 2004

Location: United States

Posted: December 04, 2005 at 11:16 PM / IP Logged

Anything is possible...think it out first. Good luck

~The Rookie~

Rookie of the year that is...

Don't let the smoke out of your equiptment..it doesn't go back in.

Back to Top

hobobasher

Copper - Posts: 66

Joined: September 23, 2005

Location: Rhode Island, United States

Posted: December 12, 2005 at 3:47 PM / IP Logged

Yeah amn sounds like a good setup. Just please make sure double and tripple check the edges where your fg and your mdf will meet. Make sure you do a good job o nthose edges if you dont youll be in fo a surprise. I like the idea of the amp rack its gonna be pretty sick just think it out but thats a good idea. Good luck

Back to Top

jlord16

Silver - Posts: 322

Joined: September 08, 2005

Location: Australia

Posted: December 12, 2005 at 8:54 PM / IP Logged

Sounds interesting, it will be unique, good luck

Clarion DB36MP

Infinity Kappa Perfect 10"

Respone 800w Mono

ALPINE MRP-F250

*Custom fabrications*

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

FG box with amp rack

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.