the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Vinyl Corners On Box?


Post ReplyPost New Topic
< Prev Topic Next Topic >
LooneyG 
Member - Posts: 43
Member spacespace
Joined: October 16, 2002
Location: United States
Posted: February 13, 2006 at 9:58 AM / IP Logged  
Does anyone have any tips on how to get Vinyl to look good on the 90 Degree Corners of a Box ??? Any tricks/pictures on how to overlap it and cut it or such ??? The box i'm working on is 48" Wide 16.5" Tall and 3" Depth it's just a Trim box featuring some Sandblasted Plexi Work... Any info is appreciated...
LooneyG 
Member - Posts: 43
Member spacespace
Joined: October 16, 2002
Location: United States
Posted: February 13, 2006 at 4:31 PM / IP Logged  
Anyone have any kind of Info about this ???
Wherm 
Copper - Posts: 51
Copper spacespace
Joined: August 19, 2003
Location: United States
Posted: February 14, 2006 at 5:55 PM / IP Logged  
I would start by using a router and rounding off the edges. Then start in the middle, and use vinyl that stretches. Using a heat gun helps too. With rounded edges, you should be able to streatch it over the corners and staple it on the backside, or at least someplace it's not visible. If you don't round the edges, I wouldn't vinyl it. 90 degree corners will most likely rip the material. If it doesn't rip when you put it on, it could rip later on like if something bumps it forcing the edge to poke through the vinyl. I like to do at least a 3/8" roundover, some of my friends do small 45 degree angles on the edges with their routers. Just remember, if you don't stretch the vinyl when putting it on, it won't look very good. So I'd recommend not trying to find ways to trim, or overlap it. It'll pull away from those spots eventually.
A time consuming, yet effective way I've seen people use is this: cut side, front, and top pieces a little larger than your display box and vinyl each one separately. Then fasten them around your display box and the only seems you'll have are where the pieces meet. If your going to have seems, at least these would be neat. I've seen people cover rectangular speaker boxes this way.
bellsracer 
Silver - Posts: 703
Silver spacespace
Joined: January 14, 2006
Location: United States
Posted: February 15, 2006 at 1:47 AM / IP Logged  

To get rid of the seams, cut where the vinyl overlaps but keep the edges as close together as possible. Then use the vinyl repair kit to seam them up and create an extra clean look.

Ganbatte ne!

Never send your ducks to eagle school.
The difference between ordinary and extraordinary is that little extra.
The 3Ls of life: Learn from the Past, Live for the Present, Look to the Future.
toolinmaine 
Member - Posts: 26
Member spacespace
Joined: November 07, 2005
Location: United States
Posted: February 15, 2006 at 5:06 PM / IP Logged  
I would first rout the edges like above posts said and then cut the vinyl about 2 inches to big. Then i would fold under an inch on both sides. Place where you want it and use an awl to punch holes. drill holes to line up in the corners and use pretty rivits to finish it off.  it would be cool to do the rest of the box in tweed, kinda like G&G Fender Stratocaster Cases from the sixties!
eric anderson-nosredna cire

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer