using part of trunk for sub box

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / using part of trunk for sub box (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mcben789

Copper - Posts: 171

Joined: October 01, 2007

Location: Mississippi, United States

Posted: October 01, 2007 at 6:35 PM / IP Logged

hey i was wondering about using the back part of my trunk for an enclosure...i was wanting to put put the sub in the back part of my trunk and run the port up through the back panel into the cabin of my car. i have a power acoustik mofo 15, wondering would i just need to build a box to fit in the back part of my trunk or could i use the back part for part of the box.

thanks alot

ben

Sasquatch...

We know your legend's real...

Back to Top

mr beta

Member - Posts: 17

Joined: October 22, 2006

Posted: October 02, 2007 at 12:13 AM / IP Logged

I think your port need to point in the same direction as your sub. You'll need to build a box out of mdf or f'glass it. The trunk isn't going to be airtight and will be the wrong size.

I'll let the experts tune in on this though. I'm no pro.

Back to Top

dctrdrama

Member - Posts: 3

Joined: September 29, 2007

Location: Maine, United States

Posted: October 02, 2007 at 7:57 AM / IP Logged

AS i was told in one of my prior posts it is not good to have the port and the sub facing in diffrent directions.

Back to Top

mcben789

Copper - Posts: 171

Joined: October 01, 2007

Location: Mississippi, United States

Posted: October 02, 2007 at 2:58 PM / IP Logged

what about if its bandpass?

Sasquatch...

We know your legend's real...

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

using part of trunk for sub box

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.