the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

pioneer bt200 engine noise problem


Post ReplyPost New Topic
< Prev Topic Next Topic >
ranchero1964 
Member - Posts: 2
Member spacespace
Joined: April 30, 2012
Posted: April 30, 2012 at 4:42 PM / IP Logged  
Hello all! I have installed (for quite sometime) a BT200 Bluetooth for my Iphone and my wifes android, in her car, the head unit is a AVIC D2. every once and awhile for a period of 4-6 months, the person calling the "car" get a VERY loud engine noise in the callers phone and sounds like the driver sound like they are in a cave. on the other hand the driver can hear the caller perfectly fine though the cars speakers. any hint on why this is happening? it does it on both phones and some time it just works well. then the next day it might not. also when you stream music from the device through the car speakers it sounds fine.
ANY HELP?
thanks
bt200
AVIC d2
iphone 4
android phone
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: May 27, 2012 at 1:56 AM / IP Logged  
I doubt if it's your car if you can't hear it, could be a glitch of the cellular system or the actual Bluetooth kit, I suspect the latter.
Try contacting Pioneer Tech. or swapping out the B/tooth part.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: May 27, 2012 at 1:58 AM / IP Logged  
I doubt if it's your car if you can't hear it, could be a glitch of the cellular system or the actual Bluetooth kit, I suspect the latter.
Try contacting Pioneer Tech. or swapping out the B/tooth part.
i am an idiot 
Platinum - Posts: 13,666
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: May 27, 2012 at 10:46 AM / IP Logged  

Inspect every inch of your microphone cable.  Also check the socket on the BT200, as well as the plug at the end of the microphone cable.  Use the device while wiggling the plug.  You are looking for pinched or violated insulation on the cable.

ranchero1964 
Member - Posts: 2
Member spacespace
Joined: April 30, 2012
Posted: May 27, 2012 at 11:32 AM / IP Logged  

I accually found the problem last week.

I completely uninstalled the WHOLE system, the NAV and all, checked every connection, splice, gound etc...

I found where the installer grounded EVERYthing to same point int he car, bypass and all. I re-connected all the harnerss made sure everything was tight and tightly grounded.  the mic wire was Crushed, not pinched in one location. I moved and rerouted to a safer location and it seemed to cure the problem.

Thanks for the help!

P


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You can vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer