theoretical led's flash on beat amppowrd?

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / theoretical led's flash on beat amppowrd? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ken_woofers.

Member - Posts: 20

Joined: May 03, 2009

Location: Alabama, United States

Posted: May 05, 2009 at 9:01 PM / IP Logged

Hypothetically speaking, the strip of LED's inside my subwoofer enclosure...say it were to be wired differently then it is now.(to a seperate battery switch operated) If I bridge the connection ontop of my subs' connection on the amplifier, find some kind of in-line resistor to GREATLY reduce power, since power is sent to the subs on the beat of the music, theoretically, would my lights flash in this fassion with the music?

AMP is a Rockford Fosgate 2 Channel PUNCH (p200-2)

LED lights are currently run to a 9volt switch, but dont run that bright.

If this could work, someone please help me do this!?

Serielle Verkabelung

Back to Top

bigjohnny

Copper - Posts: 293

Joined: September 23, 2008

Location: Ontario, Canada

Posted: May 05, 2009 at 9:47 PM / IP Logged

no you need more components than that.

just by a sound unit, there are many available. you can rewire them as needed it isn't too hard to remove a mic from the board and remote locate it somewhere.

Back to Top

icearrow6

Copper - Posts: 497

Joined: February 02, 2009

Location: California, United States

Posted: May 05, 2009 at 11:24 PM / IP Logged

There are "shock" sensors for that. Your local audio or auto parts store should carry bars of LED that flash to the bass. Just use those and use a new speaker terminal to wire the light. I'm guessing is a Band Pass box since you wanna put the lights "inside".

Back to Top

ken_woofers.

Member - Posts: 20

Joined: May 03, 2009

Location: Alabama, United States

Posted: May 06, 2009 at 9:00 PM / IP Logged

Alright. Thanks guys, I dont really know anything about lights, just sound.

Serielle Verkabelung

Back to Top

jackass09

Member - Posts: 11

Joined: January 21, 2009

Location: Oklahoma, United States

Posted: May 12, 2009 at 5:28 PM / IP Logged

i know some people have said that this method aint safe but what i did is connected them directly to the amp speakers. it always worked good with me until i sold that car...i dont know if because i had around 8 or 9 LEDs made a difference than just 1 or 2

"JaXtEr"

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

theoretical led's flash on beat amppowrd?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.