hid hi/lo kit

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / hid hi/lo kit (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

a l 3 x

Member - Posts: 20

Joined: January 03, 2012

Posted: January 03, 2012 at 7:04 PM / IP Logged

I have a couple of issues with my bi-xenon hi/lo HID kit, basically when you flick to high beam the high beam light on the dash doesn't illuminate.

Also, occasionally one or both the lights gets stuck on lo beam and doesn't flick to high.

Any ideas people?

Cheers

Back to Top

ropuma

Copper - Posts: 102

Joined: February 16, 2010

Location: Illinois, United States

Posted: January 04, 2012 at 8:48 AM / IP Logged

Use a relay to trigger the HD lights

Back to Top

a l 3 x

Member - Posts: 20

Joined: January 03, 2012

Posted: January 04, 2012 at 7:25 PM / IP Logged

To trigger the high beam or the dash light?

There is a relay in the kit but how would i go about adding my own

Back to Top

id sean

Member - Posts: 22

Joined: December 20, 2011

Location: New York, United States

Posted: January 04, 2012 at 7:56 PM / IP Logged

is it a 9007 or 9004 kit?

Sean McAuliffe

Sales Rep.

Installation Distributors

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

hid hi/lo kit

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.