an alternating led circuit

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / an alternating led circuit (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

p40whk

Copper - Posts: 50

Joined: April 07, 2009

Location: Kentucky, United States

Posted: March 13, 2013 at 9:37 PM / IP Logged

I'm trying to take two of the 3528 SMD LED flat light strips similar to these: Light Strips

and wire them in such a way that I can alternate them one on the other off then switch similar to a railroad flasher or the wingtip lights on an aircraft.

I've done a ton of google searches but all that I've come up with is two bulb flashers and I need each of the whole strips to illuminate.

Specs for these are:

-Input volts: DC 12V

-Current per meter: 400mA

-24 watts/5 meter

-Viewing Angle : 120°

Any suggestions would be appreciated

Back to Top

oldspark

Gold - Posts: 4,913

Joined: November 03, 2008

Location: Australia

Posted: March 13, 2013 at 10:38 PM / IP Logged

If the flashers are for 12V bulbs, then just substitute the LED strings.

A 12V 3W bulb is equivalent to 400mA if bulb size matters.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

an alternating led circuit

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.