3 Sets of Switch Back Halos to Turn Signal, 2007 Tundra

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / 3 Sets of Switch Back Halos to Turn Signal, 2007 Tundra

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mcdonaldcm87547

Member - Posts: 2

Joined: August 20, 2018

Location: Florida, United States

Posted: August 20, 2018 at 10:35 AM / IP Logged

I have a pair of headlights with two sets of switchback halos. I also have a pair of morimoto fog lights with 1 switchback halo in each. I would like to hook up all the switchbacks to my turn signal by tapping into my stock harness(if this will work). I have acquired a "tapable" harness that will go from my stock headlight connector to the hid kit I have.

My question is would it the best if I soldered 3 into one into the tap harness I have or is there another way to achieve the results.

I spent the better part of the morning un pinningand refining my stock connectors due to t-taps destroying my factory harness.

Back to Top

mcdonaldcm87547

Member - Posts: 2

Joined: August 20, 2018

Location: Florida, United States

Posted: August 20, 2018 at 10:36 AM / IP Logged

It's a 2007 toyota tundra if that matters

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.