the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

On/Off Rocker Switch With Seperate Momentary Switch


Post ReplyPost New Topic
< Prev Topic Next Topic >
mpsticks 
Member - Posts: 1
Member spacespace
Joined: October 17, 2018
Location: Washington, United States
Posted: October 17, 2018 at 7:02 AM / IP Logged Link to Post Post Reply Quote mpsticks
So I'm working with the led caution strobes that you can buy at AutoZone. Most of them come with wireless remotes now days but I purchased some a while back that were hard-wired and were controlled using rocker switches. The switches were a side by side set up with one switch that turned it on/off and the other being a momentary switch that you pushed to cycle through the flash patterns. This little dual rocker switch assembly was mounted in the end of a 12 volt plug thing that plugged into your cigarette lighter. Long story short, I wanted to mount the rocker switches into my dash and took it all apart but I didn't pay any attention to the wiring setup. Now I cant figure out how to wire the dang thing(s) back up and make them work. Is anyone familiar with or does anyone know how to or have a wiring diagram for this dual rocker switch setup? I know it's probably super simple but when it comes to this kind of thing I'm not the smartest. Thanks in advance.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer