the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Wiring for Bi-LED Projector Retrofit?


Post ReplyPost New Topic
< Prev Topic Next Topic >
spud2388 
Member - Posts: 1
Member spacespace
Joined: December 16, 2006
Posted: April 23, 2019 at 4:10 PM / IP Logged Link to Post Post Reply Quote spud2388
I am looking for a way to wire up a set of PJX bi-led projectors retrofit I completed for my 17 Ram Sport. I am having to run them off a relay harness as I did a quad build (2 projectors per side) and it is too much for the stock wiring. The low beams work fine, but the high beams are stumping me. The projectors require the low beam input to receive power for them to work (flip shutter). So I need a way to power both the low beam and high beam inputs at the same time via the factory high beam wire and have the low beam still work stand alone.
If I use a regular 4 pin NO relay, it works for the high beams, triggers both, but when the low beams are turned on, it backfeeds (proper term?) and turns on the high beams as well. I assume I need a diode here to prevent the cross feed to the high beam wires? Or so there a relay that has two outputs that are not connect when not powered and would allow the lows to get power and not send it over to the high beam wire?
Like this where 87 and 87b would be going to the high and lows beams when power is sent to the relay, but would not allow the high beam to cross feed when the low beam relay is activated and the high beam relay is not (as both relays would be wired together to the low beam input).
Wiring for Bi-LED Projector Retrofit? -- posted image.
baby of frog is called
If that makes sense at all..?
eguru 
Copper - Posts: 340
Copper spacespace
Joined: February 04, 2018
Location: Quebec, Canada
Posted: April 25, 2019 at 7:39 PM / IP Logged Link to Post Post Reply Quote eguru
If you draw a schematic of your existing connections, it would be easier for us to provide an informed response.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, March 18, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer