2 Color LED, 2 Positive Inputs

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / 2 Color LED, 2 Positive Inputs

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

furyexpert

Member - Posts: 1

Joined: February 08, 2022

Location: Tennessee, United States

Posted: February 08, 2022 at 6:34 PM / IP Logged

Hey guys need a little help

Want to run a 2 color led on my truck with the 1st color driven from the daytime running lights the 2nd color driven from fog lights.

So when fog lights come on it changes to color 2. (White). When DRL are on color 1( Amber ). So fog light takes over

Please advise

Back to Top

geepherder

Platinum - Posts: 3,668

This member consistently provides reliable information

Joined: October 27, 2003

Posted: February 09, 2022 at 4:09 PM / IP Logged

Connect ignition power to terminal 30 of your relay, 87a to LED color 1 (DRL indicator), 87 to LED color 2 (fog lights indicator). Connect the vehicle's fog light positive output to 86 and ground 85.

You can always add a suppression diode across the coil if you want (striped side to 86).

My ex once told me I have a perfect face for radio.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.