custom underbody kit

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / custom underbody kit (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

hamesworth

Member - Posts: 3

Joined: January 16, 2006

Location: United States

Posted: January 16, 2006 at 3:52 PM / IP Logged

how hard would it be to make a custom underbody kit out of led's i mean i have a bunch. but how would i mount them, or get them in a tube so i wouldn't have to worry about water damaging them. also how would i wire the led's in?

-hamesworth-

Back to Top

total_overkill

Copper - Posts: 93

Joined: November 24, 2005

Location: Canada

Posted: January 17, 2006 at 3:16 PM / IP Logged

Do you have any experience wiring LED's? This I must say is alot of work. Do you know how to program them? make em strobe flash ect? Or do you want them to be just all Bright?

If you want to save the time I would suggest getting a cheap set off Ebay. After saving all the work it will probably work out cheaper for ya. they usually come with a module for strobbing ect. No matter what though when you have em , Either bought or made. I would put extra coats of Clearcoat on them to make em even more waterproof. I have seen these LED bars loose sections of LEDs all the time from water leakage.

40 grit has saved my life sometimes =[

Back to Top

Search for other posts by total_overkill

hamesworth

Member - Posts: 3

Joined: January 16, 2006

Location: United States

Posted: January 17, 2006 at 10:33 PM / IP Logged

well my thing is, that i would cut the end of the led's to give them a wider range and look more as one light, instead of a bunch of little lights. that's the only thing. but i don't know how to program them, only how to make them solid.

-hamesworth-

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

custom underbody kit

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.