the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

one sub hits harder than the other


Post ReplyPost New Topic
< Prev Topic Next Topic >
tehmenace 
Member - Posts: 22
Member spacespace
Joined: January 02, 2008
Location: Illinois, United States
Posted: January 21, 2008 at 11:12 PM / IP Logged  
Hey, I have 2 12" Kicker CVRs. I just bought a new Cadence TX1000D amp to replace a panasonice amp. Everything was working fine with the panasonic amp, I just wanted more power. So right now I have everything hooked up to the Cadence and one of my two subs bumps hard. The other sub barely moves at low volumes but will eventually start to bump when it gets louder, but it never comes remotely close to what the other sub is doing. What could be causing this?
swerve 
Copper - Posts: 149
Copper spacespace
Joined: January 10, 2007
Location: Oregon, United States
Posted: January 21, 2008 at 11:35 PM / IP Logged  
you double checked the connections on the subs? sounds like one voice coil got disconnected.
git yer swerve on!
aznboi3644 
Gold - Posts: 2,600
Gold spaceThis member consistently provides reliable informationspace
Joined: May 01, 2006
Location: United States
Posted: January 22, 2008 at 12:45 AM / IP Logged  
yeah take the subs out and rewire the subwoofers
tehmenace 
Member - Posts: 22
Member spacespace
Joined: January 02, 2008
Location: Illinois, United States
Posted: January 22, 2008 at 7:17 AM / IP Logged  
ok, i'll try that...its the only thing that makes sense. thanks.
tehmenace 
Member - Posts: 22
Member spacespace
Joined: January 02, 2008
Location: Illinois, United States
Posted: January 23, 2008 at 10:28 PM / IP Logged  
well i found out what was wrong...one of the connections inside the box where the sub connects to a spade terminal was disconnected...i feel so stupid now lol
swerve 
Copper - Posts: 149
Copper spacespace
Joined: January 10, 2007
Location: Oregon, United States
Posted: January 23, 2008 at 11:12 PM / IP Logged  
its no big deal, it happens more often than you think. make sure to crimp the connector once you put it on the terminal to make sure it doesn't pop off again!
git yer swerve on!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer