the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

y off to use abass, subwoofer controller


Post ReplyPost New Topic
< Prev Topic Next Topic >
camarob4c1 
Member - Posts: 28
Member spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: September 27, 2004
Location: United States
Posted: March 29, 2008 at 11:22 PM / IP Logged  

I have a 2005 Pontiac GTO.  I have replaced the entire factory stereo system and now I want to add a third sub and amp.

I have an Alpine CDA-9885 HU and off one of the two RCA preouts I am running an Alpine amp to power the four cabin speakers.

I have a second Alpine amp off the only other RCA preouts, it is powering 2 JL audio subs on the rear deck.  It works good, but I would like some more bass.

So, I bought a third Alipne amp a MRP-M850 to power a Alpine sub in the trunk.  But I need to know, can I "Y" off the RCA preouts on the back of the HU, and use a Bass Knob controller to control the third amp?

Thanks, Tom

i am an idiot 
Platinum - Posts: 13,667
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: March 30, 2008 at 3:30 AM / IP Logged  
Yes
camarob4c1 
Member - Posts: 28
Member spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: September 27, 2004
Location: United States
Posted: March 30, 2008 at 11:29 AM / IP Logged  
camarob4c1 wrote:

I have a 2005 Pontiac GTO.  I have replaced the entire factory stereo system and now I want to add a third sub and amp.

I have an Alpine CDA-9885 HU and off one of the two RCA preouts I am running an Alpine amp to power the four cabin speakers.

I have a second Alpine amp off the only other RCA preouts, it is powering 2 JL audio subs on the rear deck.  It works good, but I would like some more bass.

So, I bought a third Alipne amp a MRP-M850 to power a Alpine sub in the trunk.  But I need to know, can I "Y" off the RCA preouts on the back of the HU, and use a Bass Knob controller to control the third amp?

Thanks, Tom

Or..... is there a better option without replacing amps and HU ?

DYohn 
Moderator - Posts: 10,741
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: April 22, 2003
Location: Arizona, United States
Posted: March 30, 2008 at 11:34 AM / IP Logged  
Why not use the subwoofer output from the HU and run a new set of RCA cables?  That way you retain your fade control and do not have to lose the subs if you fade to the front.
Support the12volt.com
camarob4c1 
Member - Posts: 28
Member spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: September 27, 2004
Location: United States
Posted: March 30, 2008 at 11:45 AM / IP Logged  

DYohn wrote:
Why not use the subwoofer output from the HU and run a new set of RCA cables?  That way you retain your fade control and do not have to lose the subs if you fade to the front.

I am currently using it for the amp that is powering the two JL subs on the rear deck.

DYohn 
Moderator - Posts: 10,741
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: April 22, 2003
Location: Arizona, United States
Posted: March 30, 2008 at 11:58 AM / IP Logged  
camarob4c1 wrote:

DYohn wrote:
Why not use the subwoofer output from the HU and run a new set of RCA cables?  That way you retain your fade control and do not have to lose the subs if you fade to the front.

I am currently using it for the amp that is powering the two JL subs on the rear deck.

Then you got your answer in the first reply from i am an idiot.

Support the12volt.com

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, April 25, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer