jbl mono amp bp600.1

Home / the12volt's Install Bay / Car Audio / jbl mono amp bp600.1 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mikes454

Member - Posts: 1

Joined: April 07, 2008

Posted: April 07, 2008 at 2:09 AM / IP Logged

does anyone know how much difference it will make running a jbl bp600.1 mono amp at one ohm rather than two?i can buy two 12" alpine type R subs , but they are dvc 2ohm, so i can only get .5 or 2 ohm load with them.should i wait and find some dvc 4ohm subs so i can get the amp down to one ohm???

Back to Top

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: April 07, 2008 at 7:06 AM / IP Logged

The amp does not have to be run at it's minimun load. Yes it will make more power at 1 Ohm, but it will work harder and possibly not last as long. If you have to get all of the bass you can get, you should find some dual 4 Ohm drivers. If you are wanting to add a little bass to your system, the dual 2s wired at 2 Ohms will give you a lot more (longe life) out of your amp.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

jbl mono amp bp600.1

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.