battery isolator, 96 silverado

Home / the12volt's Install Bay / Car Audio / battery isolator, 96 silverado (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

s10riddinlow

Member - Posts: 1

Joined: January 29, 2006

Location: United States

Posted: May 07, 2008 at 7:26 AM / IP Logged

im running a stinger isolator in a 96 chevy silverado for the 4 back batterys. im not sure how to wire this thing in. has ne one installed one before. thanks guys

Back to Top

jvillefinest

Copper - Posts: 255

Joined: December 29, 2003

Location: Florida, United States

Posted: May 07, 2008 at 10:04 AM / IP Logged

Run power from the front battery to a fuse to the isolator then out the isolator to another fuse to the secondary batteries. Then starter power to one of the smaller lugs and ground to the other smaller lug make sure it makes a thud when you turn the key forward and you should be good.

2007 Acura TSX

SQ setup in the works

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

battery isolator, 96 silverado

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.