stock system expansion

Home / the12volt's Install Bay / Car Audio / stock system expansion (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

razorbacx

Copper - Posts: 91

Joined: June 08, 2003

Location: United States

Posted: July 23, 2008 at 7:18 PM / IP Logged

Car: 2005 Honda Accord LX 4 dr

Stock HU, Scosche 4 channel Line Out Converter, US Acoustics 4 Channel USB4065 Amp, Infinity 6 1/2 in the front and MB Quart 6x9 in the rear. Is it possible for me to add a sub to this current configuration? If so, how can I do it?

Thanks,

Razorbacx

Back to Top

fiberglasslvr

Copper - Posts: 116

Joined: June 26, 2008

Location: California, United States

Posted: July 23, 2008 at 9:02 PM / IP Logged

that amp has a line out on it so you can run an rca out from the amp and that will be you signal for a sub amp, just make sure you run proper distribution for power and ground

Back to Top

razorbacx

Copper - Posts: 91

Joined: June 08, 2003

Location: United States

Posted: July 23, 2008 at 9:39 PM / IP Logged

It really can't be that simple...can it? Would I not have to tie into the LOC (line out converter) in some way?

Back to Top

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: July 23, 2008 at 9:52 PM / IP Logged

Since the amp has a line out on it, you will simply need to connect an RCA cable to that jack and run it to your sub amp. It really is that simple, you do not need to do anything with the line out converter.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

stock system expansion

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.