the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

porting single cab truck box?


Post ReplyPost New Topic
< Prev Topic Next Topic >
kickz l7 
Member - Posts: 15
Member spacespace
Joined: January 03, 2008
Location: New Jersey, United States
Posted: August 04, 2008 at 12:22 AM / IP Logged  
Is it possible to port a truck sub box? if you need pictures of it i can get them box is already made but it is sealed
megaman 
Copper - Posts: 385
Copper spacespace
Joined: June 24, 2008
Location: Montana, United States
Posted: August 04, 2008 at 11:18 AM / IP Logged  
Yes you can.  As long as you have the room for the extra space required for a ported enclosure.  I've built them in the past and the scenario is usually a single 12" sub.  Slot ported is easier in this case.
kickz l7 
Member - Posts: 15
Member spacespace
Joined: January 03, 2008
Location: New Jersey, United States
Posted: August 04, 2008 at 11:39 AM / IP Logged  
It is for a 12" kicker l7 but it is an oddly shaped box im not sure of were i should port it. If you want pictures i could get you some?
DYohn 
Moderator - Posts: 10,741
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: April 22, 2003
Location: Arizona, United States
Posted: August 04, 2008 at 12:38 PM / IP Logged  
No, you cannot simply port any existing enclosure - well, of course you CAN cut a hole in it, but only if you don't care that it might sound like ass.  You need to know the internal volume of the enclosure to see if it it useful as a vented system.
Support the12volt.com
kickz l7 
Member - Posts: 15
Member spacespace
Joined: January 03, 2008
Location: New Jersey, United States
Posted: August 04, 2008 at 11:12 PM / IP Logged  
im not sure on how to get the airspace of this box it is an odd shape and is pretty big
i am an idiot 
Platinum - Posts: 13,666
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: August 04, 2008 at 11:36 PM / IP Logged  
Post the dimensions of the box and let us know how thick of material was used, and we can figure that part out for you.
The pictures would help too.
kickz l7 
Member - Posts: 15
Member spacespace
Joined: January 03, 2008
Location: New Jersey, United States
Posted: August 05, 2008 at 12:58 AM / IP Logged  
I will take pictures tommarow and measurement's

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer